ࡱ; hkl ɀ\pMahendra Ba==x;.8@"1Calibri1Calibri1Calibri1Calibri1Calibri1Calibri1hCalibri1Calibri1@Calibri1@Arial1@Arial1@Arial1Arial1 Arial Narrow1h Arial Narrow1Arial1Arial1@Calibri1!hBookman Old Style1hArial1@ Arial Narrow1@Arial1@8Arial1hArial1Cambria1@Cambria1Arial1Calibri1 Calibri1Calibri14Calibri1 Calibri1Calibri1Calibri1,8Calibri18Calibri18Calibri1>Calibri14Calibri1<Calibri1?Calibri1h8Cambria1Calibri1 Calibri1Calibri"$"#,##0_);\("$"#,##0\)!"$"#,##0_);[Red]\("$"#,##0\)""$"#,##0.00_);\("$"#,##0.00\)'""$"#,##0.00_);[Red]\("$"#,##0.00\)7*2_("$"* #,##0_);_("$"* \(#,##0\);_("$"* "-"_);_(@_).))_(* #,##0_);_(* \(#,##0\);_(* "-"_);_(@_)?,:_("$"* #,##0.00_);_("$"* \(#,##0.00\);_("$"* "-"??_);_(@_)6+1_(* #,##0.00_);_(* \(#,##0.00\);_(* "-"??_);_(@_)3" "\ #,##0;" "\ \-#,##0=" "\ #,##0;[Red]" "\ \-#,##0?" "\ #,##0.00;" "\ \-#,##0.00I"" "\ #,##0.00;[Red]" "\ \-#,##0.00u8_ " "\ * #,##0_ ;_ " "\ * \-#,##0_ ;_ " "\ * "-"_ ;_ @_ .)_ * #,##0_ ;_ * \-#,##0_ ;_ * "-"_ ;_ @_ @_ " "\ * #,##0.00_ ;_ " "\ * \-#,##0.00_ ;_ " "\ * "-"??_ ;_ @_ 61_ * #,##0.00_ ;_ * \-#,##0.00_ ;_ * "-"??_ ;_ @_  0.0_ 0_  0.00_  #,##0.00_ 0.0"Yes";"Yes";"No""True";"True";"False""On";"On";"Off"],[$ -2]\ #,##0.00_);[Red]\([$ -2]\ #,##0.00\) 0.000                                                                       ff + ) , * ! "  # P $ P %  % &   ' ` (      )   * + a> ,  |@ @   +x@ @  +x@ @  |@ @  x@ @   x@ @   x@ @   +x@ @   +x@ @   x  +x x@ @   x@ @   *x@ @   +|@ @   +x@ @   +|@ @  |@ @  ++|@ @  x x  x  (8  (x (0 | x  x  x x x@ @   x@ @   x@ @   |@ @   *x@ @   *|@ @   +*|@ @   *|@ @  X  x@ @   "x@ @   "|@ @   +"|@ @   X  x@ @   X  x@ @  *|@ @  +*|@ @  +*|@ @   H  "8@ @  X  X X  x@ @   @  *|@ @    x@ @   "|@ @   (8@ @ "x@ @   h X x@ @  x@ @  +"|@ @  X X  +"|@ @  X  +*|@ @  x@ @  *x@ @  +*|@ @    "8@ @  |@ @   |@   | @   |@ @   |@ @   |@ @  |@ @  |@ @  |@ @  +x@ @  +x@ @  |@ @ 3 |@ @ * @ @  |@ @ * |@ +x@  +@ @ )  20% - Accent1 20% - Accent2 20% - Accent3 20% - Accent4 20% - Accent5 20% - Accent6 40% - Accent1 40% - Accent2 40% - Accent3 40% - Accent4 40% - Accent5 40% - Accent6 60% - Accent1 60% - Accent2 60% - Accent3 60% - Accent4 60% - Accent5! 60% - Accent6 "Accent1 #Accent2 $Accent3 %Accent4 &Accent5 'Accent6(Bad) Calculation* Check Cell+,-./Explanatory Text 0Good1 Heading 12 Heading 23 Heading 34 Heading 4 5Input6 Linked Cell 7Neutral 8Note 9Output: ;Title <Total= Warning Text`FINANCIAL BID SL-5  ;x  ; " UnitSl. No.Item DescriptionQty. Rate/ UnitAmount (In Rs.) FINANCIAL BID SHEETName of the Work:-Estimated Cost Earnest MoneyCost of B.O.Q.Time of completionName of the BidderAddress of the BidderIN FIG.IN WORDS"E-tendering fee (Non Refundable Date/Time for obtaining BOQ (Only on www.eproc.bihar.gov.in) \Last date/ time for submission of complete tender Document (Only on www.eproc.bihar.gov.in)UDate / Place of opening of tender (Technical bid only on www.eproc.bihar.gov.in ) MDate / place of opening of tender (Price bid only on www.eproc.bihar.gov.in Rs. :-EachIt will be announnced after technical evaluation. only through www.eproc.bihar.gov.in and on Institute web site www.igims.org 'Director, IGIMS, Sheikhpura, Patna - 14 BILL OF QUANTITY Rs.5,000 =00$20-04-2015 to11-05-2015 till 3.00 PM11-05-2015 at 3.30 PM;13/05/2015 at 3.30 PM in Conference Hall of IGIMS, Patna -PERMISSIBLE LIMIT UP TO 10% ("HIGH" OR "LOW")SqmTotal Amount ( Rs.) Estimated cost of Schedule ItemRs. 32,88,000=00 Rs. 65,760=00tDemolishing R.B. work including stacking of steel bars and disposal of unserviceable material within 50 metres lead:cumDismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.wDemolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead:sqmExtra for cutting reinforcement bars in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work)per RccDismantling of cement concrete platform along with curtain wall and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.120x120 cm(outside to outside)eachDistempering with oil bound washa ble Distemper of approved brand and manufacture to give an even shade .Old work (one or more coats) \Painting with synthetic enamel paint of approved brand and manufacture to give an even shadeRemoving dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. CompleteiApplying one coat of distemper primer of approved brand and manufacture on wall surface: Distemper primerSqm. Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeProviding and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motor 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.SQMtProviding and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.q Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.uProviding and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete.Providing and fixing fitting aluminium glazed sliding window with 4 mm thick glazing of frost glass fitted on aluminium rail all complete as per specification and direction of E/S.Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing  C wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring  T with : 12.54.1 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bendingkProviding and fixing anodised aluminium work for doors, windows, ventilator and partitions with extruded built up standard tubular and otner sections of approved make conforming to IS : 733 and IS : 1285,anodised trasparent or dyed to required shade according to IS : 1868,(Minimum anodic coating of grade AC 15), fixed with.rawl plugs and screws or with fixing clips , or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust fre straight, mitred and jointed mechanically wherever required including cleat angle,.Aluminium snap beading tor glazing/paneling, C.P. brass/stainless steel screws, all complete as per architecttural drawings and the directions of Engineer-in-charge.(GlazingFor fixed portion and panelling to be paid for separatelykgWProviding and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(C< ost of aluminium snap bading shall be paid in basic item.)With glass panes of 8.00 mm thickness(weight not less thar 13.75 kg/sqm)Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade) particle board Grade I, Type II conforming to IS : 12823 bonded with phenol formaidhyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors, window shutters and partition frames, with C.P. brass/stainless steel screws etc. complete as per archiectural drawings and directions oa engineer-incharge. 24.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination of other sideProviding and fixing flush door shulter of centuary board or greenply or kitply have non decorative typecore of block board 32 mm t hick including anodised aluminium butt highest with necessary screws aluminium handlle, I-drope, twoer bold etc as per specification of E/S.Providing wood work in frames of doors,windows, clerestory windows and other frames, wrought framed and fixed in position 9.1.3 Second Class teakwoodcum35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm ( 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer s specification and direction of Engineer-in-charge. 9.142.1 Non decorative finish (matt finish)Providing and fixing IS:3564 bright finished brass hydraulic door closer (best make of approved quality) with necessary accessories and screws etc. copleteProviding and fixing alluminium sliding tower bolt anodised(anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with nuts and screws etc. complete: 150x10 mm 300x10 mmProviding and fixing alluminium sliding door bolt anodised(anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with nuts and screws etc. complete: 250x 16 mmProviding and fixing alluminium handles anodised(anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete125mmProviding and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc.complete:Twin rubber stopperHalf brick masonry with bricks of class designation 100A in foundations and plinth in :Extra for half Brick masonry in superstructure above plinth level upto floor V level.Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks)jReinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. up to floor five level excluding cost of centring, shuttering, finishing and reinforcement.1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars TMTC-500- 8mm dia. 10 mm diaQCentring and shuttering including strutting,propping etc. and removal of form forALintels, beams, plinth bams, griders, bressumers and contilevers.WCement plaster in course sand, 12 mm cement plaster of mix:1:4(1 cement :4 coarse sand)6Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete includingdisposal of rubbish to the dumping ground within 50 metres lead.With cement mortar 1:4(1 cement:4 coarse sand)Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc. All complete.QProviding and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. PHED WORKProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good thea 15 mm nominal outer dia Pipes metreb 20 mm nominal outer dia Pipes rProviding and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore.rmt20 mm dia nominal bore.c25 mm dia nominal bore.d32 mm dia nominal bore.e40 mm dia nominal bore.Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)^ Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :pProviding and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete  20 mm nominal bore each  25 mm nominal bore each @Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 450x300x150 mm Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, <including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lidProviding and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsk Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm dia.nominal bore.Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm dia.nominal bore.wProviding and fixing PTMT grating of approved quality and colour.Circular type125 mm nominal dia with 25 mm waste hole. Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gmsProviding and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gmsProviding and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.6 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tapProviding and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diaProviding and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 75 mm diaProviding and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i)Single tee with door110 x110 x110 mm dia PVC 75x75x75 mm dia PVC (ii)Single tee without door(iii) Band 87.5110 mm dia PVC Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.bMirror polishing on marble work/stone work where ever required to give high gloss finish complete.!Carrage of the following materialSone Sand (45 km from Koelwar).Stone Aggregate ,(156 Km From Domchch, KodermaBricks (7P+ 1K)%oDifference of Cost of BricksDifference of Cost of Cementtonn SAY ( Rs.)SI/we offer in Figures& & . in words& & & & & & & % (Percentage) High / Less/Estimated rate 90 DAYSRs. 1,124 = 006( Sl.no-5) Tender Notice No.66 (C)/E-Tender/2015-16dCivil Work for Kidney Transplant Unit 1st floor near Dialysis Unit Diagnostic Block at IGIMS, Patna:CIVIL WORK SCHEDULE ITEMT M[ !e#R& ,@"M09S5Xq;Yp<Z=la$D`hKhKjpM lNcc||}(} 00_)}(} 00_)}(} 00_)}(} 00_)}(} 00_)}(} 00_)}(} 00_)}(} 00_)}(} 00_)}(}  00_)}(}  00_)}(}  00_)}(}  00_)}(}  00_)}(} 00_)}(} 00_)}A} 00_)ef[$ -}A} 00_)ef[$ -}A} 00_)ef[$ -}A} 00_)ef[$ -}A} 00_)ef[$ -}A} 00_)ef [$ -}A} 00_)L[$ -}A} 00_)L[$ -}A} 00_)L[$ -}A} 00_)L[$ -}A} 00_)L[$ -}A} 00_)L [$ -}A} 00_)23[$ -}A} 00_)23[$ -}A} 00_)23[$ -}A} 00_)23[$ -}A}  00_)23[$ -}A}! 00_)23 [$ -}A}" 00_)[$ -}A}# 00_)[$ -}A}$ 00_)[$ -}A}% 00_)[$ -}A}& 00_)[$ -}A}' 00_) [$ -}A}( 00_)[$ -}}) }00_)[$ -##0."\ * _ ;_ }}* 00_)[$ -???##0.???"\ * ???_ ;_ ???}-}/ 00_)}A}0 a00_)[$ -}A}1 00_)[$ -}A}2 00_)?[$ -}A}3 00_)23[$ -}-}4 00_)}}5 ??v00_)̙[$ -##0."\ * _ ;_ }A}6 }00_)[$ -}A}7 e00_)[$ -}x}800_)[$## "\ _ }}9 ???00_)[$???## ???"\  ???_ ;_ ???}-}; 00_)}U}< 00_)[$## }-}= 00_)}(}G00_)}(}W 00_)}(}w 00_)M 20% - Accent1 ef %M" 20% - Accent2 ef %M& 20% - Accent3 ef %M* 20% - Accent4 ef %M. 20% - Accent5 ef %M2 20% - Accent6  ef %M 40% - Accent1 L %M# 40% - Accent2 L湸 %M' 40% - Accent3 L %M+ 40% - Accent4 L %M/ 40% - Accent5 L %M3 40% - Accent6  Lմ %M 60% - Accent1 23 %M$ 60% - Accent2 23ٗ %M( 60% - Accent3 23֚ %M, 60% - Accent4 23 %M0 60% - Accent5 23 %M4 60% - Accent6  23 %AAccent1 O %A!Accent2 PM %A%Accent3 Y %A)Accent4 d %A-Accent5 K %A1Accent6  F %9Bad  % Calculation  }%  Check Cell  %????????? ??? Comma( Comma [0]&Currency. Currency [0]G5Explanatory Text %;Good  a%G Heading 1 I}%OG Heading 2 I}%?G Heading 3 I}%239 Heading 4 I}%uInput ̙ ??v% K Linked Cell }%ANeutral  e%.Normal b Note  wOutput  ???%????????? ???$Percent1Title I}%MTotal %OO? Warning Text %XTableStyleMedium9PivotStyleLight16 ɀ  yif  dMbP?_*+%h Page &P of &N&Q?' BP(?(jZ?)\.?MHP LaserJet Professional M12184 oX4SDDMHP LaserJet Professional M1218n0Z(dӞ4" 6i4F?M&d2?&l2cU} Y} WZ} I G}  G} $G} #H} $ UyvRRRFSvSSSSS uS S fS S *TQ*dd*dddi*kdiTipP rrr std    A  B A?   B #A@   B $A@   B A@  B A@   B  A@   B   A@   B   A @   B   A"@   B   C D C D D EI JKLMN]? _% `&a=@b̴@!c@  DD]@ _' ` a@b&@cL-@(O@ LL]@ _( `)a@b,@c@(]@ _* `+a4@bfffff6o@c@(]@ _, `-a$@byl@c̡@(]@ e. f)gh@h3333334@c@(]@ j/ `)as@b33333sI@c@R@(] @ l0 ` a33333@b@c)\@(]"@ e1 f2%g(\ox@ D?h:@cK +@(]$@ e3 f2%g(\ox@ D?hS@cvV+@(]&@ _4 m5nІ@o@cL A(](@ e6 q)gp@h@c A(]*@ e7 q)gp@ Dh u@c@@(],@ e8 q)gp@ Dh333333v@c@(].@ e9 f2h@\@h̤@c|@(]0@ j: `)9aQ@ #h??b@cA(]1@ _; `)av@bfffffJ@c"A( Dl"""LPPPFPPPPPT*wqqqqqqqq~~q Pv! v"gv#d$Td%d&v'~ v(v)v*~ v+Tv,~ v-c|.|/ d0T}1}23*4*i5~ i6T7k8}9=:;<i=i>i?i ]2@ u< `= a\@ b,v@ cgfffNA(!!]3@ !u> !`)#!wzGaW@ ! Q4@I!b6@!c끈@(""]4@ "l? "`)"aL@"b~@"c@(##]5@ #x@ #f2#y6@#hp= }@#cz@($$]6@ $_A $`&$aHzG?$b3333[@$ckt@(%%]7@ %_B %`)%a6@%bfffff@%č@(&&]8@ &lC &`&a@@&b̠@&c̠@('']9@ 'lD '`ab'c(( (]W (lE (`(a4@(bP@(c@() )]Z )lF )`)a4@)bfffff\@)cԡ@(**]:@ *lG *`*a4@*bfffffe@*ct@(++];@ +lH +`+aD@+b33333P@+c@(,,]<@ ,lI ,`,b4@,b̬T@,cؙ@(--]=@ -zJ -{ -qI@)-qfffffҀ@ -̬~@G@-cH@(..]>@ .zK .{).qI@.qR@.c@(//]?@ /_L /`&/a@/bT@/cT@(00]@@ 0lM 0`=0b@P@0bR@0c@(11]@@ 1lN 1`=1bQ@1bfffffFR@1c@(22]A@ 2O 2{2c(33]A@ 3P 3{ 34@3io@3c@(44]B@ 4eQ 4f24hI@4h33333Y@4c@(55]B@ 5lR 5f25gY@5h33333b@5cQ@(66]C@ 6eS 6g=6hi@6hV@6c@(77]C@ 7jT 7`)7b(@7b@7cgffff@(88] 8JU 8`bb8c(99]D@ 9eV 9f9c(: :]W :eX :fY:N@: n@:c>@(; ;]Z ;e[ ;fY;A@;p@;cn@(<<^D@ <l\ <fgh<c(= =]W =l] =f^=gN@=hd@=c@(> >]Z >l_ >f^>g>@>hi@>cK@(? ?]` ?la ?f^?g4@?h33333p@?c@(@DlqqqqqqOmmqqqqqqqOqqqqqGOmmOmm@iAiBiCiDiEiFiGiHIJKLMNO*PQ~ vR S T*UVWX~ Y~ Z~ [~ \~ ]^_ @]b @lc @f^@gtE@@h t@@cC+h@(A A]d Ale Af^Ag$@Ahx@Ac@(BB]E@ Blf BfghBc(C C]W Cl] CfCg@Chfffff6`@CcQx@(D D]Z Dl_ DfDg@Dh\c@Dc43333 }@(E E]` Ela EfEg@Ehd@Ech@(F F]b Flc FfFg@Fhpj@Fcԃ@(G G]d Gle GfGg@GhfffffVr@Gc@(HH]E@ Hlg H`cHc(IHU I]W Il] I`Ic@I|@Ic@(JIU J]Z Jl_ J`Jc@J33333@Jc33333@(KJU K]` Kla K`Kc@Kfffffʃ@Kcfffffʓ@(LKU L]b Llc L`Lc@L33333c@Lcfffff @(MLU M]d Mle M`Mc@Mʕ@McW@(NMUN]F@ Nlh N`cNc(ONU O]W Oli O`Oc@O{@Oc@(POU P]Z Plj P`Pc@PfffffF~@PcfffffF@(QPPn LLPUQ^F@ Qlk Q`Qb@Qbfffffܠ@Qc@(RPR^G@ Rll R`Rq@Rq@Rc@(SPRUS^G@ Slm S`-Sq@Sq̶@Sc@(TPSUT^H@ Tln T`-Tb.@Tb@Tc@(UPTUU^H@ Ulo U`-Ub$@Ub@Uc3@(VPUUV^I@ Vzp Vq-Vq.@VqfffffN@Vc@(WPVUW^I@ Wzq Wq-Wq@Wq33333d@Wc @(XPWUX^J@ Xzr Xq-Xq@Xqh@Xcx@(YPXUY^J@ Yzs Yq-Yq@Yq̬g@Yc@(ZPYUZ^K@ Zxt ZfZh"@Zh@Zc̬@([PZU[^K@ [xu [`^[q4@[qfffffj@[c@(\P[U\^L@ \xv \`^\q4@\q_@\c@(]P\U]qL@ ]ew ]fhh]c(^P]U ^qx ^ey ^fhh^c(_P^U _qW _ez _f-_h$@_hfffffs@_c@(`P_UDlmmOmmmmmYwwwwwYwq{{{{{{{{{{{YU`abcdefg ih*iijklmnoQp[qRrtRstVttVutVvtVwtVxtX `qZ `e{ `f-`h$@`hl@`c֡@(aP`U aq| ae} afhhac(bPaU bqW bez bf-bh@bhp@bc@(cPbU cqZ ce{ cf-ch@ch33333ci@cc@(dPcU dq~ de dfhhdc(ePdU eqW ee ef-eh@ehfffffe@ec$@(fPeU f]Z fe{ ff-fh@fh ]@fc4@(gPfUg^M@ ge gfgh@gh33333@gc@(hPh^M@ he h`)h`p= ףh@hbg@hcGz@(iPiN@ i iic(jP j~W je j`&j`>@jbfffff@jc@(kPjU k~Z ke k`&k`@kb(\@kc(\@(lPkU l~` le l`l`@lb}@lcV@(mPlU m~b me m`m`@ mDlmb@mcgffff@(nPmU n~d ne n`n`@nb̒@nc@oPnUoI oP! oKLM#oNIAp %nBpO pP pPP\!pPIAr DoA qqr>? r" r r?rFIA34Dps>@ s s s?st>@ t t t?tu>@ u u u?uv> v@vw>wxW xx6 wUwwUwwqqOwwwwOM"[FFF*>@Fd qq  xxxxrr      vvssttuuww-7L Attention ! Kindly, Enter Rate in Words.vvT Attention !% Kindly, Enter Address of the Bidder.vttQ Attention !" Kindly, Enter Name of the Bidder.ssO Attention!! Kindly Enter Numeric Value only.uuN Attention !EnHIGH LESS AS PER BOQ RATEPwwggD Root Entry FiWorkbookSummaryInformation(DocumentSummaryInformation8TOh+'0HP` t Sunil Mahendra@?{@ؚ@rM{Microsoft Excel՜.+,0$H P X    Worksheets Named RangesFINANCIAL BID SL-5 'FINANCIAL BID SL-5'!Print_Area"'FINANCIAL BID SL-5'!Print_Titles     !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefgj